Architect Lerici: this page collects the public data available for owners and foreign buyers considering a villa project in Lerici (SP): OMI villa values, the area, planning rules and landscape constraints, and the checks to make before buying a plot. Every figure is sourced; the studio’s assessments are labelled as such and where a figure is not available we say so. Federico Cappellina Architects is based in Verona.
Studio projects
Some projects by the studio: each card leads to the project page, with photos and description. The full list is on the Projects page.

Villa MD Home — Verona
Villa in Verona, 280 m²: white volumes, a black wall, floor-to-ceiling glazing and a pool. See the project →

AV Home — Dueville (Vicenza)
Contemporary villa of about 300 m² in Dueville (Vicenza), with an infinity pool, interiors and a private spa. See the project →

All studio projects
Villas, interiors and multi-residential projects by the studio: the full list is on the Projects page. See all projects →
Talk to the studio: architect Lerici
For information on a plot, a property or a villa project: write to the studio, the answer comes in writing.
or write to info@federicocappellina.com

Architect Lerici: villa market in Lerici: OMI data
The reference for residential values is the OMI database (Osservatorio del Mercato Immobiliare) published by the Agenzia delle Entrate, the Italian revenue agency. OMI quotes average values per square metre by property type and by zone within each municipality. For Lerici, the second-half 2025 figures are published via recasa.re.
- Ville e villini (villas and small detached houses), medium value: 5,000 €/m².
- Maximum for the zone, same property type: 6,000 €/m².
- Average across all residential property types: 2,873 €/m².
- Residential sales in 2024 (NTN, numero di transazioni normalizzate — a transaction count weighted by the share of each property sold): 194.8.
- Of these, sales of units over 145 m²: 25.
Two points follow from the data. First, the gap between the villa figure and the all-types average is wide, so the OMI band for villas should be read as a distinct segment rather than as a general price level for the town.
Second, the number of transactions above 145 m² is small in absolute terms; the larger-unit segment is thin, and comparables for a specific property may be limited. Both are observations on the published figures. They are not a forecast of value, and OMI values are banded averages, not valuations of an individual building. A valuation for a specific property requires a separate survey.
Architect Lerici: the area of Lerici
Lerici is a coastal municipality in the province of La Spezia (SP), Liguria, on the Gulf of La Spezia on the Ligurian Sea. It borders Arcola, Ameglia, Sarzana and La Spezia (Wikipedia; Italia in Dettaglio). The municipal centre is given at an altitude of 10 m above sea level (Italia in Dettaglio).
- Resident population: 9,245 at 31 December 2024, based on ISTAT data reported by Tuttitalia. The same source publishes 9,245 for 2025 as well, but does not indicate a separate survey date for that year (Tuttitalia).
- Road distance: La Spezia is given at 11 km from the municipal seat (Italia in Dettaglio). Reliable road distances to other provincial capitals or to major airports are not known from the sources consulted and must be checked independently.
- Seismic zone: zone 3. Climate zone: D, 1,427 degree-days. These values come from a secondary municipal profile, not from an official act (Comuni d’Italia).
- Protected areas and Natura 2000 sites: not known. The sources consulted do not allow verification of which protected areas or Natura 2000 sites fall within the municipal territory.
For a project, the seismic classification is relevant to structural design and to the documentation required for permits; the practice treats zone 3 as a design input to be confirmed against the official regional classification. The absence of verified data on protected areas is a gap to be closed before any site is assessed, since a Natura 2000 designation can affect what is permitted on or near a plot.
Architect Lerici: planning and landscape constraints in Lerici
The current municipal planning instrument is the Piano Urbanistico Comunale (PUC) — the municipal urban plan — approved by Council resolution no. 36 of 10 April 2002. The municipality records an update approved by resolution no. 11 of 21 April 2023 (municipal document). The municipal page on the PUC update also documents the adoption of an update by resolution no. 65 of 23 December 2022 (adoption of the PUC update). The municipal portal is at lerici.istanze-online.it.
On landscape, the municipality states that works in constrained zones which alter the external appearance of buildings require the autorizzazione paesaggistica (landscape authorisation) under art. 146 of Legislative Decree 42/2004, the Italian code on cultural heritage and landscape (municipal page). The constraints in question derive from arts. 136 and 142 of the same decree. Art. 136 covers areas protected by specific provision; art. 142 lists categories protected by law, including coastal strips, woodlands and mountain territories.
The available sources do not include an official map or list identifying, for Lerici, the areas affected by art. 136 constraints or the individual art. 142 categories. It is therefore not known which portions of the municipal territory fall within them. Municipal material consulted refers to the protection of woodlands under art. 142 but does not locate those areas within Lerici (planning document).
For a project, this is a verification to be made with the municipality and against the official constraint mapping before design work starts: the presence of a landscape constraint determines whether the authorisation under art. 146 is required and conditions the timing of a permit application.
On new construction, the PUC norms distinguish interventions on the existing built stock from new construction, but the material available does not allow a reliable reconstruction of general limits applying across the whole municipality. A single threshold cannot be stated: not known (general norms). The PUC does contain a discipline for the adaptation and renewal of the existing building stock, under which extensions or changes of use are subject to specific conditions and limits; this is not a general rule authorising new construction (PUC norms).
Whether a specific lot is buildable depends on the zoning and the norms applicable to that area; the sources gathered do not permit this to be determined. The practice’s assessment is that buildability must be established plot by plot, from the PUC zoning map and the norms for the zone, before any purchase decision is treated as final.
Architect Lerici: what this means for designing a villa in Lerici
The planning framework described above has direct consequences for a project. The points below are the practice’s assessment of those consequences; they are not official interpretations and do not replace a written check with the municipality.
- Seismic zone 3. The available source gives Lerici as seismic zone 3 (Comuniditalia). For the project this means structural design and the deposit of structural calculations follow the seismic rules in force for that zone. The practice treats structural requirements as a design input from the first layout, not as a later addition. The zone classification itself should be confirmed against the official regional act.
- Climate zone D, 1,427 degree-days. The same source gives climate zone D with 1,427 degree-days (Comuniditalia). For the project this sets the reference for winter heating demand and for the performance requirements that apply to the building envelope and systems. It is a design parameter, not a constraint on layout.
- Landscape authorisation. The municipality states that works in protected zones which alter the external appearance of buildings require landscape authorisation under art. 146 of D.Lgs. 42/2004 (Comune di Lerici). For the project this means the external design — materials, openings, roof, terraces, colour — is subject to a separate authorisation step with its own timing. The practice therefore develops the external appearance in parallel with the planning application rather than after it.
- Uncertain extent of the landscape constraints. The available sources do not identify which parts of the municipal territory fall under art. 136 or which categories of art. 142 apply where; this must be checked with the municipality. For the project this is a first-order question: whether a plot is inside a protected zone changes the procedure, the documents required and the programme. It is checked before any design work begins.
- No single general limit on new construction. The PUC norms distinguish work on existing buildings from new construction, but the available documents do not allow a reliable general limit to be reconstructed for the whole municipality; this must be checked with the municipality (PUC general norms). For the project this means there is no shortcut: the zoning and the norms for the specific area govern, and the answer for one plot does not transfer to another.
- Rules on existing stock are not a licence to build. The PUC contains a discipline for adapting and renewing the existing building stock, with extensions or changes of use subject to specific conditions and limits (PUC, art. 24, All. B1). The practice reads this as a set of conditions on existing buildings, not as a general authorisation for new construction. A buyer should not assume that a ruin or an existing volume carries an automatic right to rebuild at the same size.
- Thin market for larger units. With 25 sales above 145 m² in 2024, comparables for a large villa may be scarce. For the project this argues for a design that is legible to a future buyer — clear room sizes, documented works, and a file that shows what was authorised and when.

Architect Lerici: checks before buying a plot in Lerici
The following checks are specific to this municipality. Each should be documented in writing before a purchase commitment.
- Zoning of the specific plot. Obtain the PUC zoning map and the norms for that area from the municipality (Comune di Lerici). The PUC was approved with Council resolution no. 36 of 10 April 2002, with an update approved by resolution no. 11 of 21 April 2023 and an earlier adoption by resolution no. 65 of 23 December 2022 (PUC update page). Confirm which version is in force for the plot.
- Landscape constraints on the plot. Ask the municipality whether the plot falls within an area protected under art. 136 or art. 142 of D.Lgs. 42/2004, and whether works would require authorisation under art. 146 (landscape authorisation page). The available sources do not map these areas; the figure must be checked with the municipality.
- Buildability and any general limits. Request written confirmation of what can be built on the plot. No single general limit can be reconstructed from the available PUC documents; the figure must be checked with the municipality.
- Status of any existing building. If there is a building on the plot, check its authorised state and whether the PUC rules on adaptation and renewal apply, and on what conditions (PUC, art. 24, All. B1).
- Seismic classification. Confirm the seismic zone against the official regional act; the available source gives zone 3 (Comuniditalia). This affects structural design and cost.
- Protected areas and Natura 2000 sites. The available sources do not allow verification of which protected areas or Natura 2000 sites fall within the municipality; this must be checked with the competent authorities.
- Access and distances. La Spezia is given at 11 km from the municipal seat (Italia in Dettaglio). Road distances to other centres and airports could not be established from the available sources and must be checked independently.

How the studio works
The practice follows a sequence of stages. The list below describes the method, not specific assignments.
- Stage 1 — Feasibility. Review of the plot or building, the applicable zoning and norms, and the landscape position, with the checks above documented in writing.
- Stage 2 — Brief and concept. Definition of the programme, room schedule and budget range, followed by a concept layout tested against the planning and structural parameters.
- Stage 3 — Planning and authorisations. Preparation of the planning application and, where required, the landscape authorisation, with the external design developed to the level those procedures require.
- Stage 4 — Technical design. Structural, envelope and systems design coordinated with the consultants required for the seismic zone and the energy performance of the building.
- Stage 5 — Construction. Tender support, site supervision and progress reporting, with a record of authorised works kept for the owner.
- Stage 6 — Handover. Delivery of the documentation set, including the authorisations obtained and the as-built record.
Do you need an architect Lerici for your plot?
Before buying, the studio reads the planning instrument, constraints and indices of the plot with you. Send the location, cadastral references or the listing.
or write to info@federicocappellina.com

Frequently asked questions
When should you involve an architect Lerici before buying a plot?
Before signing the preliminary contract. An architect Lerici reads the planning instrument, the constraints map and the technical rules that apply to the plot, and lists the checks to request from the municipality and the notary: this is the stage where a mistake costs least.
What does an architect Lerici do besides the design?
An architect Lerici follows the building and landscape permit, coordinates the consultants (structures, services, geologist) and supervises the works. The stages are described in the section «How the studio works».
How to choose an architect Lerici for a villa?
Look at completed projects, knowledge of local planning instruments and the ability to follow the site. The studio’s projects are on the Projects page.
How much does an architect Lerici cost for a villa?
An architect Lerici’s fee depends on the size of the work, the plot’s constraints and the stages requested (design, permit application, construction drawings, site supervision): it is set in a written quotation after the plot has been analysed.
What should you ask an architect Lerici to put in writing before the appointment?
The scope with the stages included, the fee for each, the estimated timing and the list of consultants involved. An architect Lerici should also state which checks remain with the client.
Can an architect Lerici handle the landscape permit too?
Yes: where the area is subject to a landscape constraint the architect prepares the documentation for the landscape authorisation together with the design; timing depends on the authorities concerned.
How long does an architect Lerici need to design a villa?
It depends on complexity and approval times: the design develops in stages and permit timing must be checked with the municipality before a schedule is fixed.
Can you involve an architect Lerici before buying the plot?
It is the prudent choice: the architect checks indices, constraints and access on the plot before the purchase, so conditions can be discussed with the seller while the decision is still open.
Do you need an architect Lerici for a renovation?
If the work needs a building permit or touches a landscape-protected area, an architect Lerici checks which procedure applies with the municipal technical office before any commitment.
What can an architect Lerici tell you before an offer on a plot?
An architect Lerici can read the planning instrument and the constraints map for the plot and list what must still be verified, so that the offer reflects what can actually be built.
Can I build a new villa on any plot in Lerici?
No general answer can be given. The PUC distinguishes work on existing buildings from new construction, and the available documents do not allow a reliable general limit to be reconstructed for the whole municipality. Buildability depends on the zoning and norms for the specific plot and must be checked with the municipality.
Does a protected landscape designation apply to my plot?
The municipality states that works in protected zones altering the external appearance require authorisation under art. 146 of D.Lgs. 42/2004. The available sources do not map which areas fall under art. 136 or which categories of art. 142 apply where; this must be checked with the municipality.
Which version of the PUC applies?
The PUC was approved with Council resolution no. 36 of 10 April 2002. An update was approved with resolution no. 11 of 21 April 2023, following an adoption by resolution no. 65 of 23 December 2022. The version in force for a specific plot should be confirmed with the municipality.
What do the OMI figures tell me about the value of a specific villa?
They do not value an individual building. OMI gives banded averages by property type and zone: 5,000 €/m² medium for villas and small detached houses, with a zone maximum of 6,000 €/m², against an all-types average of 2,873 €/m². A valuation of a specific property requires a separate survey.
How many large units change hands in Lerici?
In 2024 there were 25 residential sales of units over 145 m², out of 194.8 residential transactions in total (NTN). The larger-unit segment is thin, so comparables for a specific property may be limited.
Does the seismic zone affect the design and cost?
Yes. The available source gives Lerici as seismic zone 3, which brings structural design and calculation deposit under the seismic rules for that zone. The practice treats this as a design input from the first layout. The classification should be confirmed against the official regional act.
What does climate zone D mean for a project?
The available source gives climate zone D with 1,427 degree-days. This sets the reference for winter heating demand and for the performance requirements applying to the envelope and systems. It is a design parameter rather than a limit on layout.
Architect Lerici: contact
For a specific plot or building in Lerici, the practice can carry out the checks above and set out in writing what the applicable rules allow. To discuss a project, contact the studio. Selected work is published at federicocappellina.com/projects.
Architect Lerici: notes for those weighing an appointment
- An architect Lerici checks the planning designation of the plot before any volume is hypothesised.
- An architect Lerici asks the municipality for the certification of the constraints that affect the area.
- An architect Lerici compares the design with the building indices and the distances from boundaries and roads.
- An architect Lerici coordinates geologist, structural engineer and services engineers from the concept stage.
Architect Lerici: ask the studio for information
For a villa project or a plot consultation: tell us the municipality, the area and your starting ideas. Direct contact with the architect, in writing.
or write to info@federicocappellina.com